ENG

RUS

LAT
Biopreactors.netWebsite of the Biotechnical Center
Home About UsContact UsOur productsResearch
Do you know?
All manufacturers of bioreactors
Biotechnology popular
Basic Bioreactor Design
Important aspects in Bioreactors
Our Products

Laboratory bioreactor EDF-5.3_3

EDF-5.3_3 is jacketed glass bioreactor with working volume 4 liter (total volume 6.5 liter). The thermoregulation is carried out by circulating of thermostated water through the jacket.

Completation includes following main parts:

  • The bioreactor vessel with upper stainless steel lid and jacketed glass vessel;
  • Novel magnetic drive (Motor is mounted in upper lid). The range of mixer rotation speed is 40 - 1000 rpm;
  • Standard rushton turbine mixing system consisting of 2 mixers and bottles (optionally the mixers for mycelial or another shear sensitive microorganisms);
  • In the upper lid are threaded borings, in which can be following devices installed:
  1. 1.Needles (4) - for the supply of substances capable of being titrated and metered;
  2. Air condenser with a filter and an output valve;
  3. Temperature sensor;
  4. pH sensor;
  5. pO2 sensor;
  6. Sparger;
  7. Foam sensor;
  8. Chemostat tube;
  9. Additional devices according request.
  • Bioprocess controller BIO-3 (colored 5.6’’ touch screen display, measuring and control of pH, pO2, temp, foam, revolutions n- Basic configuration, other parameter control and operations according to request);
  • Stainless steel control cabinet;
  • Rotameter, pressure regulator, inlet and outlet microbiological filters;
  • Thermostat;
  • Peristaltic pumps block (consist of 3 pumps) and bottles (3) for titration;
  • Temperature and foam sensor;
  • Mettler-Toledo sterilisable pH sensor 405-DPAS-SC-K85/325 or analogue including stainless steel protection covering and fittings;
  • Mettler-Toledo sterilisable pO2 sensor Inpro 6820/12/320 or analogue including fittings;
  • Frame construction;
  • Frame for sterilization in autoclave;
  • Other standard accessories to ensure full functionality in fermentations.

Optionally:

  • Program and pump modules for feeding (e.g. fed-batch) according adjusted time profiles of feeding productivity;
  • Valve and program module for O2 enrichment for manual or automatic pO2 control;
  • The mixers for mycelial and another shear sensitive microorganisms.
Download EDF5.3_3 technical parameters
To Other Products To the top of this page
Copyright ©2003 by
Biotechnical Center (BTC)
All rights reserved.